PSA Grading 101
Whether you're buying a slab or listing one, it helps to know what a PSA grade actually represents — and what it doesn't. A plain-English primer on the 1–10 scale, PSA 10 / Gem Mint, and reading population and gem rate.
What PSA grading means
PSA (Professional Sports Authenticator) is a third-party grading company. When you submit a raw card, PSA examines it, gives an opinion on whether it's genuine, assigns a condition grade on a 1–10 scale, and seals it in a tamper-evident holder — the "slab" — with a label showing the card's details, a unique certification number, and the grade.
In marketplace terms, a grade does two things at once: it's a standardized, comparable read on condition, and it's a third-party opinion that the card is what it claims to be. That's why graded cards are easier to price and trade sight-unseen than raw cards — buyers aren't relying solely on a seller's photos and description.
What grading is not: it isn't a price, an appraisal, or a promise that a card will sell for any amount. It's a condition and authenticity opinion from PSA — useful context, not a value guarantee. On Holo, a slab's grade is information that helps you compare listings; you still set your own price and verify the card and the slab for yourself.
How PSA grades are read
PSA uses a 1-to-10 numeric scale, where 10 is the top regular grade and 1 is the lowest. Each number has a name collectors use as shorthand. From highest to lowest:
A few details worth knowing. PSA also issues half grades (for example 8.5) for cards sitting just above a whole number. It uses qualifiers — short codes such as OC (off-center), ST (staining), PD (print defect), MK (marked), and MC (miscut) — to flag a specific issue on an otherwise higher-condition card. And some submissions come back authenticated but not numerically graded (for instance when there's evidence of trimming or alteration). Treat the exact rules as PSA's to define — the
page is the current source of truth and can change.
PSA grading standards
| Grade | PSA name | Reads as |
|---|---|---|
| 10 | Gem Mint | Top regular grade — essentially flawless to the eye |
| 9 | Mint | One very minor flaw allowed |
| 8 | NM-MT (Near Mint–Mint) | Slight imperfections on close look |
| 7 | NM (Near Mint) | Minor visible wear |
| 6 | EX-MT (Excellent–Mint) | Noticeable but light wear |
| 5 | EX (Excellent) | Light surface and corner wear |
| 4 | VG-EX (Very Good–Excellent) | Clearly handled, still presentable |
| 3 | VG (Very Good) | Heavier wear, possible light crease |
| 2 | Good | Significant wear and damage |
| 1 | Poor | Intact but heavily worn |
What PSA 10 / Gem Mint means
A PSA 10 — "Gem Mint" — is the top regular grade. In broad strokes it describes a card that looks essentially flawless: sharp, square corners, clean edges, a clean surface, and centering within PSA's tightest tolerance on both the front and the back. PSA publishes the exact tolerances, and they're the authority on where the line sits.
Because the bar is so high, PSA 10s are scarcer than lower grades for most cards — which is a big part of why they command attention. Important nuance for collectors: a PSA 10 is a top-grade opinion, not a perfection certificate and not a price tag. Two PSA 10s of the same card can still differ in eye appeal, and a grade never tells you what someone will pay.
The condition factors behind a grade
A grade is a single number, but it summarizes several things at once. These are the factors collectors learn to look at — and the same things worth photographing clearly when you list a raw card on Holo:
You don't need to grade your own cards to use this. Knowing the factors makes you a sharper buyer (you'll know what to scrutinize in a slab's photos) and a clearer seller (you'll know what to show).
- Centering — How even the borders are, front and back. The most common reason a sharp card misses a top grade.
- Corners — Sharpness vs. softening, dings, or fraying. Easy to spot on close, angled photos.
- Edges — Whitening, chipping, or nicks along the card's edges.
- Surface — Scratches, scuffs, print lines, indentation, dimples, and how the foil/holo sits.
- Print & focus — Print defects, color registration, and clarity from the print run itself.
- Eye appeal — The overall look — gloss, color, and how clean it presents at a glance.
- Qualifiers — Codes (OC, ST, PD, MK, MC) that flag one specific issue on an otherwise higher card.
- No-grade outcomes — Evidence of trimming or alteration can mean authentication without a number.
What population and gem rate can tell you
Population is how many copies of a specific card PSA reports having graded at each grade. A card might have, say, far more 9s than 10s. Population is a scarcity signal: all else equal, fewer high-grade examples is rarer than many.
Gem rate is a simple ratio built from those counts — the PSA 10 population divided by the total PSA population for that card. A lower gem rate means PSA 10s are a smaller share of everything graded; a higher gem rate means top grades are comparatively common for that card.
gem rate = PSA 10 population ÷ total PSA population
It's context about how often this card has graded at the top — across cards already submitted to PSA. Nothing more.
On a card's Holo market page, where this kind of reference is shown, it's labeled, source-attributed, and presented for context only.
What population and gem rate cannot tell you
This is the part collectors most often over-read, so it's worth being blunt:
Used well, population and gem rate are background context that helps you ask better questions — not a shortcut to a verdict, a value, or a guarantee.
- It is not a prediction. — A low gem rate does not mean your raw copy will grade PSA 10 — or even grade well at all. Your card's outcome depends on your card.
- It is not an appraisal or a price. — Population and gem rate say nothing about what a card is worth or will sell for. Price depends on demand, condition, timing, and many factors a count can't capture.
- It is not an authenticity guarantee. — It's grading-population context, not a check on any individual card or slab.
- It is a moving snapshot. — Populations grow as more cards are submitted, so the numbers shift over time.
How to use this when buying or listing on Holo
Buying a slab: read the grade as a starting point, then look closely at the listing photos for the factors above — centering, corners, edges, surface. Cross-check the card's name, set, and number against the slab label, and compare active listings on the card's
, where you can also see the PSA population panel for grade-by-grade context. The grade is PSA's opinion; the buying decision is yours.
Listing a slab: state the grade and certification number exactly as they appear on the label, and add clear, well-lit photos of the front, back, and label. Accurate, honest details build trust and help your listing stand out — Holo is built around condition clarity and listing evidence.
Thinking about submitting a raw card? Grading takes time and costs money, and turnaround and pricing change — so check PSA's current
page directly rather than relying on any figure quoted elsewhere (including here). Holo doesn't grade cards and isn't a submission service. For a broader look across companies, see
.
Holo market pagetrading card grading serviceCard grading explained
Source notes & disclaimer
PSA defines and may update its own standards, scale, qualifiers, and services. For anything authoritative — exact grade tolerances, qualifier rules, current pricing, and turnaround — go to the primary sources:
Holo is an independent collectibles marketplace and is not affiliated with Nintendo, Game Freak, Creatures, The Pokémon Company, PSA, BGS, CGC, eBay, TCGplayer, or any other third-party brand. PSA grades are third-party opinions, not Holo guarantees. Holo does not guarantee authenticity, grade, condition, value, liquidity, or future sale price, and does not imply any PSA endorsement, partnership, or approval. Any population or gem-rate reference shown in Holo is source-attributed and provided for context only — not an appraisal, prediction, or guarantee. Grading details, pricing, and turnaround are set by PSA and subject to change; always confirm against PSA's official pages.
PSA grading standardsPSA trading card grading service
Deine Meinung
Would you send it to the graders?
Tipp eine an. Kein Login, keine falschen Antworten.
Weiterlesen
Mehr aus dem Holo Magazine.

Pokémon Club Is Reportedly Expanding Into Boys & Girls Clubs. The Details Are the Story.

Japan's card channel shows Kubfu and both Urshifu forms for Aura Seeker
